Chevrolet Uplander Trailer Wiring Installation And Review Videos

Trailer Wiring Harness Installation - 2006 Chevrolet Uplander 118396- Video

Today on this 2006 Chevrolet Uplander we are going to install part number 118396, the t-one wiring harness from Tow Ready. We are also going to install part number 37185, the adapter 4-pole to 7 and 4-pole multi-tool connector. The first step that we are going to do is go ahead and open up the hatch of this vehicle and remove both taillights. Alright and this is our connection point right here. And we are going disconnect. Push down on this tab here and it comes apart. We are going to repeat the same process on the passenger side. Are next step is to take the t-one wiring harness and the 4-pole part. We are going to tuck it behind the bumper here. Have it out of the bottom so we can pull it over by the hitch. And then we are going to take our connection with the yellow and brown wires and we are going to install that on to the wire harness that comes out from the van. So let us go ahead and snap those two together. We are going to leave that be for now. And then our connection with the green wire, that is going to get routed on to the other side of the vehicle, on the passenger side. So we are just going to take this and just tuck it on down and pull it out the bottom too. With this, we are just going to go ahead and reinstall our taillight and hook up the taillight electrical to this connection right here and reinstall the whole taillight assembly back onto the vehicle. 1:13 more

4/20/2010 3:33:19 AM